Cookie Consent by Privacy Policies

One of the countless ways we manage to turn timber into sawdust or shavings is by drilling holes in it. These are so that different timbers can be joined together using offset oak pegs (a process called “drawboring” – see this previous blog on the subject). Most of the holes we drill are either 25mm (1 inch) or 19mm (3/4 inch) depending on the size of peg required for the forces within the joint, for example whether it is in compression or under tension. All when and good so far ………the tricky bit is being able to drill the hole vertically, through a piece of oak that might be a foot deep. If, using a long auger bit, you get the angle wrong to start with, there is no way to correct it, and it might emerge half way towards the next parish. Not good. That is why all timber framers display a “concentrating” “serious” face when drilling…

welsh oak frame Castle Ring

Castle Ring Oak Frame oak framed house

Do you want a quick quote?
Or to discuss your project?

If you're considering an oak framed building (or larch, or douglas fir), let's talk. We'll gladly put together an outline quote (completely free, with no strings attached). And we need very little information from you to do so.
Equally, we're always here, at the end of the phone, to talk through your ideas. 01547 560 231
Castlering Wood, Beggars Bush, Evenjobb, Powys, LD8 2PB